Restoration Notebook Batteries

Restoration of notebook batteries is carried out in several stages: dismantling the housing. As a rule, structurally body panels are made non-separable. Halves or stitched together one-piece snaps, or glued around the perimeter. Therefore, in order to carefully disassemble the battery requires knowledge of the features of its construction. Testing of battery cells. Carried out in order to ascertain how many elements to be replaced.

Change the battery cells selectively makes sense only if the malfunction is not due to aging of components, and defective one of them. Otherwise, the inevitable consistent failure of the other elements in a short time after the restoration of the battery again will not work the battery. Selection of replacement battery cells to the parameters. One of the the most critical phases of work on which depends the result of recovery. Electrical Association of battery cells in the group requires a maximum matching of their characteristics. Failure to do so rules reduce the capacity laptop battery and its premature failure. Assembling the elements in the block.

Undertaken using a spot welding apparatus that prevents overheating of welded assemblies. Lithium batteries used in modern batteries do not suffer thermal overload and do not allow for electrical installation by soldering. Testing and recovery of electronics. All modern Li-Ion Battery have in their composition electronics unit, which performs the function of monitoring and control processes of charging and discharging elements. Typically, it runs on the microcontroller running the program, wired in its rom. In the event of a malfunction of the controller, it must be reprogrammed. Gluing the body. Performed using the clamps to ensure a uniform fit halves. Testing laptop batteries. It turns out the battery life of laptop batteries.